Drive selection switch

Go down

Drive selection switch Empty Drive selection switch

Post by Handyhiker on Sat May 24, 2014 7:58 am

Here is an observation. The drive selection switch has a light for one wheel drive (turff mode) and a light for all wheel drive. It is black for 2 wheel drive. In my way of thinking, 2 wheel drive is the standard drive method and the others are for as needed use. This seems to make sense as that in normal mode you would not have a light on.
I personally use turf mode most of the time as my Ranger is used around the yard 90% of the time. But it just makes sense that normal would have no light on.

2011 500 EFI Ranger, Sage Green
Full metal cab, Soft doors, Glass tip out shield, Windshield wiper, 60" Glacier plow, 42" Loader bucket, 3500# Polaris winch, Benz silent rider exhaust, Rubber bed mat, Bluetooth speaker, MP3/GPS/Smartphone mount, 20,000 Btu budget cab heater, L.E.D. driving lights, L.E.D. dome light, 35 Watt, 5000K HID head lights, Two 27Watt rear bed/load lights, Running board style nerf bars. UTV pulled trailer, Hitch mount cargo carrier.
PolarisRangerWorld Member

Posts : 71
Join date : 2013-09-05
Age : 56
Location : Akron, Ohio

Back to top Go down

Drive selection switch Empty Re: Drive selection switch

Post by Dave1942 on Wed Nov 05, 2014 8:07 pm

I agree.


Posts : 1
Join date : 2014-03-31
Age : 76
Location : East Rochester, Ohio

Back to top Go down

Back to top

- Similar topics

Permissions in this forum:
You cannot reply to topics in this forum